Shelllac how to...help

Removing shellac from the briar bowl.

1. Shellac is a shiny top coat that is often applied by a pipe maker or manufacturer to give a pipe a permanent shine. It is much easier to remove than the other topcoats that follow. On a smooth finish, it is very simple. Wipe the bowl down with isopropyl alcohol on a cotton pad. I repeat until the shine is dull once the bowl dries. I touch up the shiny spots with more alcohol. If you want to restain the pipe afterwards then you can wipe it down with acetone instead of alcohol. Both do the job but acetone also strips more of stain coat than alcohol. I finish the pipe with several coats of carnauba wax buffed to a shine with a clean buffing pad.



2. Removing shellac from a rusticated or sandblast finish is done in exactly the same way as removing stain from this finish spelled out above. (see link) I use either an alcohol bath or a very wet cloth of alcohol and wipe the finish down. Both work very well as they work deep in the grooves and nooks and crannies of the finish. The idea for me is to remove the shiny coat because to be honest I really don’t like it. I have had it come off on my hands when the pipe heats up. Therefore, the shellac coat has to go.