|
Post by pepesdad1 on Aug 20, 2020 16:08:28 GMT -5
I am renewing an old cob thread as I have had some interest from one of the members, and since we have many new members I thought I'd throw this back out there for your interest. Whelp...I picked up 3 different bottles (colors) of Fiebing's leather dye and a bottle of polyurethane gloss varnish (water-based) as well as a bottle of leather sheen which gives a durable acrylic finish...to see which of these gives the better results.
I sanded the 2 Legend cobs and 1 country gentleman cob so that the factory finish was removed. Tonight I am going to apply the leather dye to 1 of the Legends...let it dry over night and then apply the polyurethane gloss varnish and see how 1 of them comes out. All 5 of the cobs have decent looking "grain/kernels". This thread was back last year if I remember correctly...I am bring it up again to see if there is any further interest by some members...to see if they have any interest in me doing this for their cobs. Below is what the cobs look like after the staining and glazing process. I charge $10.00 per pipe with a minimum of 3 pipes per order and a $10.00 charge for priority shipping which gives you a tracking # and $50.00 insurance. If you have an interest in me doing this for you, please pm me and we can get the process started.
|
|
|
Post by pepesdad1 on Aug 20, 2020 16:27:26 GMT -5
Because I am not really looking for a job...I thought I'd give you the instructions in case you want to do it yourself. STAINING COBS 1. First sand the cobs lightly using 320 grit wet/dry sandpaper. 2. Then apply Fiebings saddle tan stain to the cob and shank ( I usually put a pipecleaner through the shank with a bend on the end to keep it from falling out, and for hanging it up to dry. Make sure you wear gloves.
3. Make sure you apply an even coat to the cob and shank. You may want to stain it twice to make sure you have an even coat. 4. Let it dry for several hours (if tacky, let it dry longer) 5. Apply Dura Clear High Gloss Polyurethane Gloss Varnish. Usually 2 coats. 6. Let dry for 3-4 hours to make sure it is dry to the touch.
|
|
|
Post by sperrytops on Aug 20, 2020 16:41:21 GMT -5
Walt, it's nice to see you posting about the cobs again. I've missed the pictures and postings.
|
|
jay
Junior Member
Edward's Pipes....only Edward's pipes....and Buccaneer in the bowl
Posts: 442
First Name: Jay
Favorite Pipe: Edwards handmade
Favorite Tobacco: Buccaneer, Special Balkan, Scottish Moor
Location:
|
Post by jay on Aug 20, 2020 17:23:52 GMT -5
I've never been a fan of cobs, for no real reason at all, but these are really very attractive. I guess I'll have to break down and acquire one to try. It seems unfair to turn my nose up at something if I haven't given it a fair trial (this does not apply to brussels sprouts, by the way).
|
|
|
Post by pepesdad1 on Aug 20, 2020 18:35:36 GMT -5
Thanks, Perry...Wife and I are feeling better about life since we adopted a rescue pup.
Jay, they are really a fine smoking pipe...they may not have the attraction of a briar, but they are smoking machines!
|
|
|
Post by Ronv69 on Aug 20, 2020 23:39:43 GMT -5
I've never been a fan of cobs, for no real reason at all, but these are really very attractive. I guess I'll have to break down and acquire one to try. It seems unfair to turn my nose up at something if I haven't given it a fair trial (this does not apply to brussels sprouts, by the way). I wasted half my life not eating Brussels Sprouts! 😁
|
|
|
Post by Legend Lover on Aug 21, 2020 4:08:52 GMT -5
I've never been a fan of cobs, for no real reason at all, but these are really very attractive. I guess I'll have to break down and acquire one to try. It seems unfair to turn my nose up at something if I haven't given it a fair trial (this does not apply to brussels sprouts, by the way). You can do some nifty things with cobs. I like trying to make them look more like a briar pipe, but I need better stems to do that. However, their smoke-ability is great. I never get dottle in a cob! pepesdad1, thanks for sharing your know-how.
|
|