|
Post by urbino on Mar 28, 2021 23:43:55 GMT -5
I put those soft rubber bits on my pipes. Makes things much more comfortable for me, and I like not having teeth marks in the stem. However, I've got a couple pipes that have small stems, and the bits keep coming off in my mouth.
Do those things come in sizes at all? Are there smaller one I could get? I don't think I've ever seen any.
|
|
CrustyCat
Junior Member

Posts: 287
First Name: Kevin
Favorite Pipe: Wire carved Starfire
Favorite Tobacco: VaPers I think...Oh, I don't know.
Location:
|
Post by CrustyCat on Mar 29, 2021 1:53:13 GMT -5
I've only ever received one size
|
|
|
Post by isett2860 on Mar 29, 2021 2:07:02 GMT -5
They come in small and large at P&C. But some times they aren’t big or small enough.
A few years ago a thread covered this topic. Several mentioned that they use shrink tubing? I was always going to try that. Just never have.
|
|
|
Post by urbino on Mar 29, 2021 2:42:17 GMT -5
They come in small and large at P&C. But some times they aren’t big or small enough. A few years ago a thread covered this topic. Several mentioned that they use shrink tubing? I was always going to try that. Just never have. Interesting. I'll look into that one. Thanks!
|
|
|
Post by fadingdaylight on Mar 29, 2021 5:03:24 GMT -5
If that doesn't work, a trip to the tubing section at the hardware store ought to turn up something that will do the job. Personally, I can't use them, they make me gag. I'm always looking for as little bit in my mouth as possible.
|
|
|
Post by Legend Lover on Mar 29, 2021 5:06:52 GMT -5
I've only noticed one size, but I'm happy to read above that there are other sizes. I tried them, but couldn't get used to them.
|
|
|
Post by isett2860 on Mar 29, 2021 8:08:31 GMT -5
There is a post in Pipes magazine. com Just Google Heat shrink tubing, an alternative to Softy bits. Looks to be a few comments about it/
Hope this helps
|
|
|
Post by taiguy66 on Mar 29, 2021 8:37:52 GMT -5
Good to know and thanks everyone for your posts. Like Urb, I’ve purchased a few bits myself for the same reason. Cheers......
|
|
|
Post by Legend Lover on Mar 29, 2021 8:39:48 GMT -5
There is a post in Pipes magazine. com Just Google Heat shrink tubing, an alternative to Softy bits. Looks to be a few comments about it/ Hope this helps Excellent! Thanks for sharing that.
|
|
RDPipes
Junior Member

http://rdpipes.briar.club/
Posts: 179
First Name: Ron
Favorite Pipe: Bulldog
Favorite Tobacco: Escudo
Location:
|
Post by RDPipes on Mar 29, 2021 19:49:17 GMT -5
I purchase mine by the bushel on eBay, yeah there Chinese made but, they are cheaper and you get a whole lot more and, they come in several sizes. If you have a vintage pipe with a very small bit you may not find one to fit it but, I have several sizes of bits and I've been able to fit them all with one. I believe if memory serves me correct that I have 9mm, 11mm and one other size I don't recall in softies I've purchased from eBay, all the same maker I believe also.
|
|
|
Post by urbino on Mar 29, 2021 22:17:51 GMT -5
Lots of good input here. Very much appreciated, all.
|
|
|
Post by toshtego on Apr 2, 2021 13:27:37 GMT -5
I used them for years as I am hard on stems. They help with the wear. Also, they seem to prevent slippage out of my open hanging mouth.
|
|